Layout Adjustment
ColorQube™ 9301/9302/9303
Fax
64
The device will identify the size of the original during scanning. If the pages have a black or dark
colored border the device will assume that the pages are smaller than they really are. To overcome this
use the Custom Scan Area feature in Original Size to enter the exact size of the page. Refer to Original
Size on page 62.
The options are:
• Both Pages use to scan both pages,
the left page of the book will be
scanned first. Use the arrow buttons
to specify an amount from 0 to 50
mm (0 to 2”) to be deleted from the
center of the book in order to delete
unwanted marks reproduced from the
gutter of the book.
• Left Page Only use to scan the left
page only. Use the arrow buttons to
specify an amount from 0 to 25mm
(0 to 1”) to be deleted from the right
side of the page in order to delete unwanted marks reproduced from the gutter of the book.
• Right Page Only use to scan the right page only. Use the arrow buttons to specify an amount
from 0 to 25mm (0 to 1”) to be deleted from the left side of the page in order to delete unwanted
marks reproduced from the gutter of the book.
• Reading Order use to select if the pages read from Left to Right or Right to Left.
Note The Reading Order option may not be displayed if it has not been enabled in Tools. Refer to
the Administration and Accounting guide for more information.
Select Save to save your selections and exit.
Several pages of a bound document can be faxed using the Build Job feature. Refer to Build Job on
page 73 for more information.
To Next Page
Loading...
