147
The inverse transformation instruction is INT.
FLTD can change the64 bits integer to32 bits floating value.
The S operand of the FLTD instruction does not support constant K/H.
D0 is integer 20, after executing the instruction, D10 is floating value 20.
Note: Before using floating number operation instructions such as EADD, ESUB, EMUL,
EDIV, EMOV and ECMP, make sure that all operation parameters are floating number.
4-8-4 Integer to double precision floating point[DFLTD,QFLTD]
1) Summary
integer to double precision floating point[DFLTD,QFLTD]
Normal ON/OFF/falling
or rising pulse edge
2) Operands
Source soft element address
Target soft element address
3) Suitable soft components
*Notes: D includes D, HD; TD includes TD, HTD; CD includes CD, HCD, HSCD, HSD; DM
includes DM, DHM; DS includes DS, DHS. M includes M, HM, SM; S includes S, HS; T
includes T, HT; C includes C, HC.
<32 bits instruction >
(D11,D10,)→(D15,D14,D13,D12)
BIN integer Binary float point
tudonghoatoancau.com
To Next Page
Loading...
Need help?
General
