146
4-8-3 Integer converts to float point [FLT, DFLT,FLTD]
1)Summary
bit integer converts to float point [FLT, DFLT,FLTD]
Normally ON/OFF,
rising/falling edge
2) Operands
Source soft element address
16 bits/32 bits/64 bits,BIN
Target soft element address
3) Suitable soft components
*Notes: D includes D, HD; TD includes TD, HTD; CD includes CD, HCD, HSCD, HSD; DM
includes DM, DHM; DS includes DS, DHS. M includes M, HM, SM; S includes S, HS; T
includes T, HT; C includes C, HC.
<16 bits instruction>
<32 bits instruction >
<64 bits instruction>
Convert BIN integer to binary floating point. As the constant K, H will auto convert by the
floating operation instruction, so this FLT instruction can’t be used.
(D10) → (D13,D12)
BIN integer Binary float point
(D11,D10) → (D13,D12)
BIN integer Binary float point
(D13,D12,D11,D10) → (D15,D14)
BIN integer Binary float point
tudonghoatoancau.com