56
There are 20 timer
interruptions. From
I40** to I59**. “**”
means the timeof timer
interruption, the unit is
ms.
There are 20 timer
interruptions. From
I40** to I59**. “**”
means the timeof timer
interruption, the unit is
ms.
P is usually used in flow; it is used together with CJ (condition jump), CALL (call
subprogram), etc.
Condition Jump CJ
Call the subprogram (CALL)
If coil X0 is ON, jump to the
programafter P1;
If the coil X0 is not ON, do not execute
jump action, but run the original
program;
tudonghoatoancau.com
To Next Page
Loading...
Need help?
General
