No. Name
User
Setting
L3-01 Stall Prevention Selection during Accel.
L3-02 Stall Prevention Level during Accel.
L3-04 Stall Prevention Selection during Deceleration
L3-05 Stall Prevention Selection during Run
L3-06 Stall Prevention Level during Run
L4-01 Speed Agreement Detection Level
L4-07 Frequency Detection Conditions
L5-01 Number of Auto Restart Attempts
L6-01 Torque Detection Selection 1
L6-02 Torque Detection Level 1
L6-03 Torque Detection Time 1
L8-01
Internal Dynamic Braking Resistor Protection
Selection (ERF type)
L8-05 Input Phase Loss Protection Selection
L8-10 Heatsink Cooling Fan Operation Selection
L8-12 Ambient Temperature Setting
L8-18 Soft CLA Selection
L8-35 Side-by-Side Selection
No. Name
User
Setting
L8-38 Carrier Frequency Reduction
n1-02 Hunting Prevention Gain Setting
n3-13 Overexcitation Deceleration Gain
o1-02 User Monitor Selection After Power Up
o1-03 Digital Operator Display Selection
o2-02 STOP Key Function Selection
o2-04 Drive/kVA Selection
o2-05 Frequency Reference Setting Method Selection
o3-01 Copy Function Selection
o3-02 Copy Allowed Selection
o4-01 Accumulated Operation Time Setting
o4-02 Accumulated Operation Time Selection
o4-03
Cooling Fan Maintenance Setting (Operation
Time)
o4-05 Capacitor Maintenance Setting
o4-07 Inrush Prevention Relay Maintenance Setting
o4-09 IGBT Maintenance Setting
o4-11 U2, U3 Initial Value Selection
E.3 User Setting Table
YASKAWA ELECTRIC SIEP C710606 31B YASKAWA AC Drive – J1000 Technical Manual
251
E
Quick Reference Sheet
http://nicontrols.com
To Next Page
Loading...
Need help?
General
