YASKAWA J1000 Technical Manual

Parameter Details
5.1 A: INITIALIZATION................................................................................................76
5.2
B: APPLICATION...................................................................................................79
5.3 C: TUNING..............................................................................................................85
5.4 D: REFERENCE SETTINGS..................................................................................90
5.5 E: MOTOR PARAMETERS....................................................................................94
5.6 H: TERMINAL FUNCTIONS...................................................................................98
5.7 L: PROTECTION FUNCTIONS............................................................................112
5.8 N: SPECIAL ADJUSTMENTS..............................................................................121
5.9 O: OPERATOR RELATED SETTINGS................................................................122
5.10 U: MONITOR PARAMETERS..............................................................................126
5
YASKAWA ELECTRIC SIEP C710606 31B YASKAWA AC Drive – J1000 Technical Manual
75
http://nicontrols.com

YASKAWA J1000 Specifications

General

Series	J1000
Voltage Class	200V, 400V
Frequency	50/60 Hz
Enclosure Rating	IP20
Enclosure Type	Open type
Voltage	200-240V, 380-480V
Control Method	V/f control
Overload Capacity	150% for 60 seconds
Protection	Overcurrent, Overvoltage, Undervoltage, Overheat, Ground Fault, Short Circuit
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit
Humidity	5-95% (non-condensing)
Enclosure	IP20
Input Voltage	200-240V, 380-480V