4.5 Absolute Encoders
4-41
4
Press the Key to setup the absolute encoder.
After completing the setup, "DONE" is flashed for
approximately one second and "BB" is displayed.
5
Press the Key to return to the display of the pro-
cedure 1.
6 To enable the change in the setting, turn the power OFF and ON again.
(cont’d)
Step Panel Display Keys Description
BB
Multiturn Clear
PGCL5
BB
Fn006:AlmHist Clr
Fn008:Mturn Clr
Fn009:Ref Adj
Fn00A:Vel Adj
- FUNCTION-
To Next Page
Loading...
