Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
76
Parameters
Permitted Values
Default
effect.
Web User Interface:
Network->Advanced->VLAN->DHCP VLAN->Active
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->VLAN->DHCP VLAN->DHCP
VLAN
static.network.vlan.dhcp_option
Integer from 1 to 255
132
Description:
Configures the DHCP option from which the IP phone will obtain the VLAN settings. You
can configure at most five DHCP options and separate them by commas.
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Advanced->VLAN->DHCP VLAN->Option (1-255)
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->VLAN->DHCP VLAN->Option
To configure DHCP VLAN discovery via web user interface:
1. Click on Network->Advanced.
2. In the DHCP VLAN block, select the desired value from the pull-down list of Active.
3. Enter the desired option in the Option (1-255) field.
4. Click Confirm to accept the change.