Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
84
3. In the IPv6 Config block, mark the DHCP or the Static IP Address radio box.
- If you mark the Static IP Address radio box, configure the IPv6 address and other
configuration parameters in the corresponding fields.
- (Optional.) If you mark the DHCP radio box, you can configure the static DNS address
in the corresponding fields.
4. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
5. Click OK to reboot the phone.
To Next Page
Loading...
Need help?
General
