Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
144
Parameters
Permitted Values
Default
None
static.auto_provision.flexible.interval
Integer from 1 to
1000
1
Description:
Configures the interval (in days) for the IP phone to perform an auto provisioning process.
The auto provisioning occurs on a random day within this period based on the phone's MAC
address.
Example:
static.auto_provision.flexible.interval = 30
The IP phone will perform an auto provisioning process on a random day (e.g., 18) based on
the phone's MAC address.
Note: It works only if the value of the parameter “static.auto_provision.flexible.enable” is set
to 1 (On).
Web User Interface:
Settings->Auto Provision->Flexible Interval Days
Phone User Interface:
None
static.auto_provision.flexible.begin_time
Time from 00:00 to
23:59
02:00
Description:
Configures the starting time of the day for the IP phone to perform an auto provisioning
process at random.
Note: It works only if the value of the parameter “static.auto_provision.flexible.enable” is set
to 1 (On).
Web User Interface:
Settings->Auto Provision->Flexible Time
Phone User Interface:
None
static.auto_provision.flexible.end_time
Time from 00:00 to
23:59
Blank
Description:
Configures the ending time of the day for the IP phone to perform an auto provisioning
process at random.
If it is left blank or set to a specific value equal to starting time configured by the parameter
“static.auto_provision.weekly.begin_time”, the IP phone will perform an auto provisioning