Yealink SIP-T2 Series - Page 167

Configuring Basic Features
143
Parameters
Permitted Values
Default
1-Monday
2-Tuesday
3-Wednesday
4-Thursday
5-Friday
6-Saturday
Example:
static.auto_provision.weekly.dayofweek = 01
If the value of the patameter “static.auto_provision.weekly_upgrade_interval” is set to 0, it
means the IP phone will perform an auto provisioning process every Sunday and Monday.
If the value of the patameter “static.auto_provision.weekly_upgrade_interval” is set to other
value (e.g., 3), it means the IP phone will perform an auto provisioning process by randomly
selecting a day from Sunday and Monday every three weeks.
Note: It works only if the value of the parameter “static.auto_provision.weekly.enable” is set
to 1 (On).
Web User Interface:
Settings->Auto Provision->Day of Week
Phone User Interface:
None
static.auto_provision.flexible.enable
0 or 1
0
Description:
Triggers the flexible feature to on or off.
0-Off
1-On
If it is set to 1 (On), the IP phone will perform an auto provisioning process at random
between a starting time configured by the parameter
"static.auto_provision.flexible.begin_time" and an ending time configured by the parameter
"static.auto_provision.flexible.end_time" on a random day within the period configured by
the parameter "static.auto_provision.flexible.interval".
Note: The day within the period is based upon the phone's MAC address and does not
change with a reboot whereas the time within the start and end is calculated again with
every reboot.
Web User Interface:
Settings->Auto Provision->Flexible Auto Provision
Phone User Interface: