To Next Page

To Previous Page

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones

152

When a user customizes feature configurations via web/phone user interface, the IP phone

will save the personalized settings to the 001565770984-local.cfg file on the IP phone only.

Note

If the value of the parameter “auto_provision.custom.protect” is set to 0, the personalized

settings in the 001565770984-local.cfg file will be overridden after auto provisioning, no matter

what the value of the parameter “auto_provision.custom.sync” is.

Scenario B Clear user personalized configuration settings

When the IP phone is given to a new user but many personalized configurations settings

of last user are saved on the phone; or when the end user encounters some problems

because of the wrong configurations, the administrator or user may wish to clear user

personalized configuration settings via phone/web user interface.

Scenario Conditions:



SIP-T46G IP phone MAC: 001565770984



The current firmware of the phone is 28.81.0.10 or later.



Provisioning server URL: tftp://192.168.1.211



static.auto_provision.custom.protect = 1

Note

To clear personalized configuration settings via phone user interface:

1. Press Menu->Advanced (default password: admin) ->Reset Config.

2. Select Reset local settings.

In this scenario, the IP phone will not upload the <MAC>-local.cfg file to provisioning server and

request to download the <MAC>-local.cfg file from provisioning server during auto provisioning.

If a configuration item is both in the <MAC>-local.cfg file on the IP phone and Common CFG

file/MAC-Oriented CFG file downloaded from auto provisioning server, setting of the

configuration item in the <MAC>-local CFG file will be written and saved to the IP phone system.

The Reset local settings option on the web/phone user interface appears only if the value of the

parameter “static.auto_provision.custom.protect” was set to 1.

If the value of the parameter “static.auto_provision.custom.sync” is set to 1, the

001565770984-local.cfg file on the provisioning server will be cleared.

Yealink SIP-T2 Series User Manual

Other manuals for Yealink SIP-T2 Series