Configuring Basic Features
155
2. Click Reset to factory to reset the phone.
The web user interface prompts “Do you want to reset to factory?”.
3. Click OK.
After startup, all configurations of the phone will be reset to factory defaults. So the value
of the parameter “static.auto_provision.custom.sync” will be reset to 0. Configurations in the
001565770984-local.cfg file saved on the IP phone will also be cleared. But configurations
in the 001565770984-local.cfg file stored on the provisioning server (tftp://192.168.1.211)
will not be cleared after reset.
To retrieve personalized settings of the phone after factory reset:
1. Set the values of the parameters “static.auto_provision.custom.sync” and
“static.auto_provision.custom.protect” to be 1 in the configuration file (y000000000028.cfg
or 001565770984.cfg).
2. Trigger the phone to perform the auto provisioning process.
As the value of the parameter “static.auto_provision.custom.sync” is set to 1, the IP phone
will download the 001565770984-local.cfg file from the provisioning server to override the
one stored on the phone. So the configurations in 001565770984-local.cfg file will be
updated and stored on the IP phone during auto provisioning. As the value of the
parameter “static.auto_provision.custom.protect” is set to 1, the personalized configuration
settings will be kept after auto provisioning. As a result, the personalized configuration
settings of the phone are retrieved after factory reset.
Scenario D Import or export the local configuration file
The administrator or user can export the local configuration file to check the personalized
settings of the phone configured by the user, or import the local configuration file to
configure or change settings of the phone.
Scenario Conditions:
SIP-T46G IP phone MAC: 001565770984
The current firmware of the phone is 28.81.0.10 or later.
To Next Page
Loading...
