Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
154
Scenario C Keep user personalized settings after factory reset
The IP phone requires factory reset when it has a breakdown, but the user wishes to keep
personalized settings of the phone after factory reset.
Scenario Conditions:

SIP-T46G IP phone MAC: 001565770984

Provisioning server URL: tftp://192.168.1.211

static.auto_provision.custom.sync = 1
Note
You can keep the personalized settings of the phone after factory reset via phone or web user
interface.
To reset the phone to factory via phone user interface:
1. Press Menu->Advanced (default password: admin) ->Reset Config.
2. Select Reset to factory settings.
The LCD screen prompts “Reset to factory setting?”.
3. Press the OK soft key.
The LCD screen prompts “Resetting to factory, please wait…”.
The LCD screen prompts “Welcome Initializing…please wait”.
To reset the phone to factory via web user interface:
1. Click on Settings->Upgrade.
As the parameter “static.auto_provision.custom.sync” was set to 1, the 001565770984-local.cfg
file on the IP phone will be uploaded to the provisioning server at tftp://192.168.1.211.

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English