Yealink SIP-T2 Series - Page 189

Configuring Basic Features
165
Parameters
Permitted
Values
Default
Enables or disables the power indicator LED to flash when a call is placed on hold or is held.
For
SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41P/T41S/T40P/T40G/T29G/T27P/T27G/T23
P/T23G/T21(P) E2 IP phones:
0-Disabled (power indicator LED does not flash)
1-Enabled ( power indicator LED fast flashes (500ms) red)
For SIP-T19(P) E2 IP phones:
0-Disabled (power indicator LED does not flash)
1-Enabled ( power indicator LED fast flashes (500ms) yellow)
Web User Interface:
Features->Power LED->Hold/Held Power Light Flash
Phone User Interface:
None
phone_setting.talk_and_dial_power_led_enable
0 or 1
0
Description:
Enables or disables the power indicator LED to be turned on when the IP phone is busy.
For
SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41P/T41S/T40P/T40G/T29G/T27P/T27G/T23
P/T23G/T21(P) E2 IP phones:
0-Disabled (power indicator LED is off)
1-Enabled (power indicator LED is solid red)
For SIP-T19(P) E2 IP phones:
0-Disabled (power indicator LED is off)
1-Enabled (power indicator LED is solid yellow)
Web User Interface:
Features->Power LED->Talk/Dial Power Light On
Phone User Interface:
None
phone_setting.missed_call_power_led_flash.enable
0 or 1
1
Description:
Enables or disables the power indicator LED to flash when the IP phone misses a call.
For
SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41P/T41S/T40P/T40G/T29G/T27P/T27G/T23
P/T23G/T21(P) E2 IP phones: