Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
214
Parameter:
phone_setting.call_appearance.conferenc
e_via_new_linekey
<MAC>.cfg
Configure the number of DSS keys to be
assigned automatically.
Parameter:
account.X.number_of_linekey
Configure whether to transfer a call using
a new line key on a per-line basis.
Parameter:
account.X.phone_setting.call_appearance.
transfer_via_new_linekey
Configure whether to set up a conference
call using a new line key on a per-line
basis.
Parameter:
account.X.phone_setting.call_appearance.
conference_via_new_linekey
Web User Interface
Configure auto linekeys.
Navigate to:
http://<phoneIPAddress>/servlet?p=feat
ures-general&q=load
Configure the number of DSS keys to be
assigned automatically.
Navigate to:
http://<phoneIPAddress>/servlet?p=acco
unt-adv&q=load&acc=0
Details of Configuration Parameters:
Parameters
Permitted
Values
Default
features.auto_linekeys.enable
0 or 1
0
Description:
Enables or disables the DSS keys to be assigned with Line type automatically.
0-Disabled
1-Enabled
Note: The number of the DSS keys is determined by the value of the parameter