Yealink SIP-T2 Series

Configuring Basic Features
275
Parameters
Permitted Values
Default
Features->General Information->Send Pound Key
Phone User Interface:
None
To configure a send key via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Key As Send.
3. Click Confirm to accept the change.
To configure a send tone and key tone via web user interface:
1. Click on Features->Audio.
2. Select the desired value from the pull-down list of Key Tone.
3. Select the desired value from the pull-down list of Send Tone.
4. Click Confirm to accept the change.
To configure a send key via phone user interface:
1. Press Menu->Features->Others->General->Key As Send.
2. Press or , or the Switch soft key to select # or * from the Key As Send field, or
select Disabled to disable this feature.
3. Press the Save soft key to accept the change.