Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
274
Parameters
Permitted Values
Default
Phone User Interface:
Menu->Features->Others->General->Key As Send
features.key_tone
0 or 1
1
Description:
Enables or disables the IP phone to play a key tone when a user presses any key on your
phone keypad.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will play a key tone when a user presses any key on
your phone keypad.
Web User Interface:
Features->Audio->Key Tone
Phone User Interface:
Menu->Basic->Sound->Key Tone
features.send_key_tone
0 or 1
1
Description:
Enables or disables the IP phone to play a key tone when a user presses a send key.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will play a key tone when a user presses a send key.
Note: It works only if the value of the parameter “features.key_tone” is set to 1 (Enabled).
Web User Interface:
Features->Audio->Send Tone
Phone User Interface:
None
features.send_pound_key
0 or 1
0
Description:
Enables or disables the IP phone not to send any pound key when pressing double #.
0-Disabled (Send one pound key by pressing double #)
1-Enabled (Do not send any pound key when pressing double #)
Note: It works only if the value of the parameter “features.key_as_send” is set to 1 (Enabled).
Web User Interface: