Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
300
Parameters
Permitted
Values
Default
Description:
Enables or disables the entered number to match the predefined string of the digit map
after pressing a send key. It is only applicable to the off-hook dialing.
The off-hook dialing includes: pick up the handset, press the Speakerphone key or press the
line key when the phone is idle.
0-Disabled
1-Enabled
Note: It works only if the value of the parameter “dialplan.digitmap.enable” or
“account.X.dialplan.digitmap.enable” is set to 1 (Enabled). The value configured by the
parameter “account.X.dialplan.digitmap.apply_to.press_send” takes precedence over that
configured by this parameter.
Web User Interface:
None
Phone User Interface:
None