Yealink SIP-T2 Series

Configuring Basic Features
301
Per-Line Parameters:
The parameters listed in the above table have a per-line equivalent that you can configure. All of the per-line parameters are listed in the following table. Note that the
per-line parameters take precedence over the global parameters. For example, “account.X.dialplan.digitmap.enable” takes precedence over “dialplan.digitmap.enable”.
X stands for the serial number of the account.
X ranges from 1 to 16 (for SIP-T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2)
Per-Line Parameters
Global Parameters
account.X.dialplan.digitmap.enable
dialplan.digitmap.enable
account.X.dialplan.digitmap.string
dialplan.digitmap.string
account.X.dialplan.digitmap.interdigit_long_timer
dialplan.digitmap.interdigit_long_timer
account.X.dialplan.digitmap.interdigit_short_timer
dialplan.digitmap.interdigit_short_timer
account.X.dialplan.digitmap.no_match_action
dialplan.digitmap.no_match_action