Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
328
Configuration Parameters
The following table lists the configuration parameters used when customizing a local contact
file:
Parameters
Permitted Values
Default
local_contact.data.url
URL within 511 characters
Blank
Description:
Configures the access URL of the local contact file (*.xml).
Example:
local_contact.data.url = http://192.168.10.25/contact.xml
Note: If the value of the parameter "static.auto_provision.local_contact.backup.enable" is set
to 1 (Enabled), the contacts in the local contact file “contact.xml” downloaded from the
provisioning server don’t take effect.
Web User Interface:
Directory->Local Directory->Import Local Directory File
Phone User Interface:
None
local_contact.photo.url
URL within 511 characters
Blank
Description:
Configures the access URL of a contact avatar file.
The format of the contact avatar must be *.png, *.jpg, *.bmp.
The contact avatar file should be uploaded to the provisioning server in advance.
Example:
local_contact.photo.url = tftp://192.168.10.25/Photo.jpg
Note: It is only applicable to SIP-T48G/T48S/T46G/T46S/T29G IP phones.
Web User Interface:
None
Phone User Interface:
None
local_contact.icon_image.url
URL within 511 characters
Blank
Description:
Configures the access URL of a contact icon file.
The format of the contact icon must be *.png, *.jpg, *.bmp.