Yealink SIP-T2 Series

Configuring Basic Features
329
Parameters
Permitted Values
Default
The contact icon file should be uploaded to the provisioning server in advance.
Example:
local_contact.icon_image.url = tftp://192.168.10.25/Photo.jpg
Note: It is only applicable to SIP-T48G/T48S/T46G/T46S/T29G IP phones.
Web User Interface:
None
Phone User Interface:
None
local_contact.image.url
URL within 511 characters
Blank
Description:
Configures the access URL of a TAR contact avatar file.
The format of the contact avatar must be *.png, *.jpg, *.bmp.
The contact avatar file should be compressed as a TAR file in advance and then place it to
the provisioning server.
Example:
local_contact.image.url = tftp://192.168.10.25/photo.tar
Note: It is only applicable to SIP-T48G/T48S/T46G/T46S/T29G IP phones.
Web User Interface:
None
Phone User Interface:
None
local_contact.data_photo_tar.url
URL within 511 characters
Blank
Description:
Configures the access URL of the compressed TAR file consisting of the avatars TAR file and
contact XML file.
All avatars needed for contacts should be compressed as a TAR file in advance.
Example:
local_contact.data_photo_tar.url = tftp://192.168.10.25/Contact.tar
Note: It is only applicable to SIP-T48G/T48S/T46G/T46S/T29G IP phones. The name of the
avatars TAR file must be photo.tar (case-sensitive), and the name of the contact XML file
must be ContactData.xml (case-sensitive).
Web User Interface:
None