Yealink SIP-T2 Series

Configuring Basic Features
361
Configure auto answer tone.
Parameter:
features.auto_answer_tone.enable
Configure auto answer mute.
Parameter:
features.mute.autoanswer_mute.enable
Configure the IP phone whether to handle
the incoming call arriving when the phone is
in another call or is dialing like a normal call.
Parameter:
features.auto_answer.first_call_only
Web User Interface
Configure auto answer.
Navigate to:
http://<phoneIPAddress>/servlet?p=accoun
t-basic&q=load&acc=0
Specify a period of delay time for auto
answer.
Configure auto answer tone.
Navigate to:
http://<phoneIPAddress>servlet?p=features
-general&q=load
Phone User Interface
Configure auto answer.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
account.X.auto_answer
0 or 1
0
Description:
Enables or disables auto answer feature for account X.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone can automatically answer an incoming call.
X ranges from 1 to 16 (for SIP-T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)