Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
364
3. Select the desired value from the pull-down list of Auto Answer.
4. Click Confirm to accept the change.
To configure a period of delay time for auto answer via web user interface:
1. Click on Features->General Information.
2. Enter the desired time in the Auto Answer Delay(1~4s) field.
3. Click Confirm to accept the change.
To configure auto answer tone via web user interface:
1. Click on Features->General Information.
To Next Page
Loading...
Need help?
General
