Yealink SIP-T2 Series

Configuring Basic Features
363
Parameters
Permitted Values
Default
None
features.auto_answer_tone.enable
0 or 1
1
Description:
Enables or disables the phone to play a warning tone when an incoming call is automatically
answered.
0-Disabled
1-Enabled
Note: For the call coming from a SIP account, it works only if the value of the parameter
“account.X.auto_answer” is set to 1 (Enabled).
Web User Interface:
Features->General Information->Enable Auto Answer Tone
Phone User Interface:
None
features.mute.autoanswer_mute.enable
0 or 1
1
Description:
Enables or disables the auto answer mute feature for the IP phone.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will mute the microphone when an incoming call is
automatically answered, and then the other party cannot hear you.
Note: It works only if the values of parameters “account.X.auto_answer” and
“features.allow_mute” are set to 1 (Enabled). It is not available to the intercom call.
Web User Interface:
None
Phone User Interface:
None
To configure auto answer via web user interface:
1. Click on Account->Basic.
2. Select the desired account from the pull-down list of Account.