Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
376
Parameters
Permitted Values
Default
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2)
Example:
account.1.anonymous_call_oncode = *72
Note: It works only if the value of the parameter “account.X.send_anonymous_code” is set to
1 (On Code).
Web User Interface:
Account->Basic->Send Anonymous Code->On Code
Phone User Interface:
Menu->Features->Anonymous->Line X->On Code
account.X.anonymous_call_offcode
String within 32 characters
Blank
Description:
Configures the anonymous call off code to deactivate the server-side anonymous call
feature for account X.
X ranges from 1 to 16 (for SIP-T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2)
Example:
account.1.anonymous_call_offcode = *73
Note: It works only if the value of the parameter “account.X.send_anonymous_code” is set to
0 (Off Code).
Web User Interface:
Account->Basic->Send Anonymous Code->Off Code
Phone User Interface:
Menu->Features->Anonymous->Line X->Off Code
To configure anonymous call via web user interface:
1. Click on Account->Basic.
2. Select the desired account from the pull-down list of Account.
3. Select the desired value from the pull-down list of Local Anonymous.
4. Select the desired value from the pull-down list of Send Anonymous Code.