Yealink SIP-T2 Series - Page 399

Configuring Basic Features
375
Parameters
Permitted Values
Default
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2)
Web User Interface:
Account->Basic->Local Anonymous
Phone User Interface:
Menu->Features->Anonymous->Line X->Local Anonymous
account.X.send_anonymous_code
0 or 1
0
Description:
Configures the IP phone to send anonymous on/off code to activate/deactivate the
server-side anonymous call feature for account X.
0-Off Code
1-On Code
If it is set to 0 (Off Code), the IP phone will send anonymous off code to the server when you
deactivate the anonymous call feature.
If it is set to 1 (On Code), the IP phone will send anonymous on code to the server when you
activate the anonymous call feature.
X ranges from 1 to 16 (for SIP-T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2)
Web User Interface:
Account->Basic->Send Anonymous Code
Phone User Interface:
Menu->Features->Anonymous->Line X->Send Anonymous Code
account.X.anonymous_call_oncode
String within 32 characters
Blank
Description:
Configures the anonymous call on code to activate the server-side anonymous call feature
for account X.
X ranges from 1 to 16 (for SIP-T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)