Yealink SIP-T2 Series

Configuring Basic Features
385
If it is set to 1 (Custom), you can configure DND feature for each or all accounts.
Note: It is not applicable to SIP-T19(P) E2 IP phones. It works only if the value of the
parameter “features.dnd.allow” is set to 1 (Enabled).
Web User Interface:
Features->Forward&DND->DND->Mode
Phone User Interface:
None
features.dnd.enable
0 or 1
0
Description:
Triggers DND feature to on or off.
0-Off
1-On
If it is set to 1 (On), the IP phone will reject incoming calls on all accounts.
Note: It works only if the value of the parameter “features.dnd.allow” is set to 1 (Enabled)
and value of the parameter “features.dnd_mode” is set to 0 (Phone) (except SIP-T19(P) E2 IP
phones).
Web User Interface:
Features->Forward&DND->DND->DND Status
Phone User Interface:
Menu->Features->DND->DND Status
features.dnd.on_code
String within 32
characters
Blank
Description:
Configures the DND on code to activate the server-side DND feature.
The IP phone will send the DND on code to the server when you activate DND feature on the
IP phone.
Example:
features.dnd.on_code = *71
Note: It works only if the value of the parameter “features.dnd.allow” is set to 1 (Enabled)
and value of the parameter “features.dnd_mode” is set to 0 (Phone) (except SIP-T19(P) E2 IP
phones).
Web User Interface:
Features->Forward&DND->DND->On Code
Phone User Interface:
Menu->Features->DND->On Code