Yealink SIP-T2 Series User Manual

Configuring Basic Features
427
Parameters
Permitted Values
Default
account.X.timeout_fwd.on_code
String within 32
characters
Blank
Description:
Configures the no answer forward on code to activate the server-side no answer forward
feature for account X.
The IP phone will send the no answer forward on code and the pre-configured destination
number (configured by the parameter “account.X.timeout_fwd.target”) to the server when
you activate no answer forward feature for account X on the IP phone.
X ranges from 1 to 16 (for SIP-T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
Example:
account.1.timeout_fwd.on_code = *76
Note: It works only if the value of the parameter “features.fwd.allow” is set to 1 (Enabled)
and value of the parameter “features.fwd_mode” is set to 1 (Custom). It is not applicable to
SIP-T19(P) E2 IP phones.
Web User Interface:
Features->Forward&DND->Forward->No Answer Forward->On Code
Phone User Interface:
Menu->Features->Call Forward->No Answer Forward->On Code
account.X.timeout_fwd.off_code
String within 32
characters
Blank
Description:
Configures the no answer forward off code to deactivate the server-side no answer forward
feature for account X.
The IP phone will send the no answer forward off code to the server when you deactivate no
answer forward feature for account X on the IP phone.
X ranges from 1 to 16 (for SIP-T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
Example:

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English