Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
428
Parameters
Permitted Values
Default
account.1.timeout_fwd.off_code = *77
Note: It works only if the value of the parameter “features.fwd.allow” is set to 1 (Enabled)
and value of the parameter “features.fwd_mode” is set to 1 (Custom). It is not applicable to
SIP-T19(P) E2 IP phones.
Web User Interface:
Features->Forward&DND->Forward->No Answer Forward ->Off Code
Phone User Interface:
Menu->Features->Call Forward->No Answer Forward->Off Code
features.forward.emergency.enable
0 or 1
0
Description:
Enables or disables the incoming calls from some authorized numbers not to be forwarded
when the call forward feature is activated.
0-Disabled
1-Enabled
Note: It works only if the value of the parameter “features.fwd.allow” is set to 1 (Enabled).
Web User Interface:
Features->Forward&DND->Forward->Forward Emergency
Phone User Interface:
None
features.forward.emergency.authorized_number
String within 511
characters
Blank
Description:
Configures the authorized numbers not to be forwarded even if call forward feature is
activated.
Multiple numbers are separated by commas.
Example:
features.forward.emergency.authorized_number = 1014,1015
Note: It works only if the values of the parameters “features.fwd.allow” and
“features.forward.emergency.enable” are set to 1 (Enabled).
Web User Interface:
Features->Forward&DND->Forward->Forward Authorized Numbers
Phone User Interface:
None
forward.always.enable
0 or 1
0