Yealink SIP-T2 Series

Configuring Basic Features
429
Parameters
Permitted Values
Default
Description:
Triggers the always forward feature to on or off for the IP phone.
0-Off
1-On
If it is set to 1 (On), incoming calls are forwarded to the destination number (configured by
the parameter “forward.always.target”) immediately.
Note: It works only if the value of the parameter “features.fwd.allow” is set to 1 (Enabled)
and value of the parameter “features.fwd_mode” is set to 0 (Phone) (except SIP-T19(P) E2 IP
phones).
Web User Interface:
Features->Forward&DND->Forward->Always Forward->On/Off
Phone User Interface:
Menu->Features->Call Forward->Always Forward->Always Forward
forward.always.target
String within 32
characters
Blank
Description:
Configures the destination number of the always forward for the IP phone.
Example:
forward.always.target = 4608
Note: It works only if the value of the parameter “features.fwd.allow” is set to 1 (Enabled)
and value of the parameter “features.fwd_mode” is set to 0 (Phone) (except SIP-T19(P) E2 IP
phones).
Web User Interface:
Features->Forward&DND->Forward->Always Forward->Target
Phone User Interface:
Menu->Features->Call Forward->Always Forward->Forward to
forward.always.on_code
String within 32
characters
Blank
Description:
Configures the always forward on code to activate the server-side always forward feature.
The IP phone will send the always forward on code and the pre-configured destination
number (configured by the parameter “forward.always.target”) to the server when you
activate always forward feature on the IP phone.
Example:
forward.always.on_code = *72