Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
430
Parameters
Permitted Values
Default
Note: It works only if the value of the parameter “features.fwd.allow” is set to 1 (Enabled)
and value of the parameter “features.fwd_mode” is set to 0 (Phone) (except SIP-T19(P) E2 IP
phones).
Web User Interface:
Features->Forward&DND->Forward->Always Forward->On Code
Phone User Interface:
Menu->Features->Call Forward->Always Forward->On Code
forward.always.off_code
String within 32
characters
Blank
Description:
Configures the always forward off code to deactivate the server-side always forward feature.
The IP phone will send the always forward off code to the server when you deactivate always
forward feature on the IP phone.
Example:
forward.always.off_code = *73
Note: It works only if the value of the parameter “features.fwd.allow” is set to 1 (Enabled)
and value of the parameter “features.fwd_mode” is set to 0 (Phone) (except SIP-T19(P) E2 IP
phones).
Web User Interface:
Features->Forward&DND->Forward->Always Forward->Off Code
Phone User Interface:
Menu->Features->Call Forward->Always Forward->Off Code
forward.busy.enable
0 or 1
0
Description:
Triggers the busy forward feature to on or off for the IP phone.
0-Off
1-On
If it is set to 1 (On), incoming calls are forwarded to the destination number (configured by
the parameter “forward.busy.target”) when the callee is busy.
Note: It works only if the value of the parameter “features.fwd.allow” is set to 1 (Enabled)
and value of the parameter “features.fwd_mode” is set to 0 (Phone) (except SIP-T19(P) E2 IP
phones).
Web User Interface:
Features->Forward&DND->Forward->Busy Forward->On/Off
Phone User Interface:

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English