Yealink SIP-T2 Series User Manual

Configuring Basic Features
431
Parameters
Permitted Values
Default
Menu->Features->Call Forward->Busy Forward->Busy Forward
forward.busy.target
String within 32
characters
Blank
Description:
Configures the destination number of the busy forward for the IP phone.
Example:
forward.busy.target = 3602
Note: It works only if the value of the parameter “features.fwd.allow” is set to 1 (Enabled)
and value of the parameter “features.fwd_mode” is set to 0 (Phone) (except SIP-T19(P) E2 IP
phones).
Web User Interface:
Features->Forward&DND->Forward->Busy Forward->Target
Phone User Interface:
Menu->Features->Call Forward-> Busy Forward->Forward to
forward.busy.on_code
String within 32
characters
Blank
Description:
Configures the busy forward on code to activate the server-side busy forward feature.
The IP phone will send the busy forward on code and the pre-configured destination
number (configured by the parameter “forward.busy.target”) to the server when you activate
busy forward feature on the IP phone.
Example:
forward.busy.on_code = *74
Note: It works only if the value of the parameter “features.fwd.allow” is set to 1 (Enabled)
and value of the parameter “features.fwd_mode” is set to 0 (Phone) (except SIP-T19(P) E2 IP
phones).
Web User Interface:
Features->Forward&DND->Forward->Busy Forward->On Code
Phone User Interface:
Menu->Features->Call Forward->Busy Forward->On Code
forward.busy.off_code
String within 32
characters
Blank
Description:
Configures the busy forward off code to deactivate the server-side busy forward feature.

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English