Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
432
Parameters
Permitted Values
Default
The IP phone will send the busy forward off code to the server when you deactivate busy
forward feature on the IP phone.
Example:
forward.busy.off_code = *75
Note: It works only if the value of the parameter “features.fwd.allow” is set to 1 (Enabled)
and value of the parameter “features.fwd_mode” is set to 0 (Phone) (except SIP-T19(P) E2 IP
phones).
Web User Interface:
Features->Forward&DND->Forward->Busy Forward->Off Code
Phone User Interface:
Menu->Features->Call Forward->Busy Forward->Off Code
forward.no_answer.enable
0 or 1
0
Description:
Triggers the no answer forward feature to on or off for the IP phone.
0-Off
1-On
If it is set to 1 (On), incoming calls are forwarded to the destination number (configured by
the parameter “forward.no_answer.target”) after a period of ring time.
Note: It works only if the value of the parameter “features.fwd.allow” is set to 1 (Enabled)
and value of the parameter “features.fwd_mode” is set to 0 (Phone) (except SIP-T19(P) E2 IP
phones).
Web User Interface:
Features->Forward&DND->Forward->No Answer Forward->On/Off
Phone User Interface:
Menu->Features->Call Forward->No Answer Forward->No Answer Forward
forward.no_answer.target
String within 32
characters
Blank
Description:
Configures the destination number of the no answer forward for the IP phone.
Example:
forward.no_answer.target = 3603
Note: It works only if the value of the parameter “features.fwd.allow” is set to 1 (Enabled)
and value of the parameter “features.fwd_mode” is set to 0 (Phone) (except SIP-T19(P) E2 IP
phones).
Web User Interface:

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English