Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
434
Parameters
Permitted Values
Default
Description:
Configures the no answer forward off code to deactivate the server-side no answer forward
feature.
The IP phone will send the no answer forward off code to the server when you deactivate no
answer forward feature on the IP phone.
Example:
forward.no_answer.off_code = *77
Note: It works only if the value of the parameter “features.fwd.allow” is set to 1 (Enabled)
and value of the parameter “features.fwd_mode” is set to 0 (Phone) (except SIP-T19(P) E2 IP
phones).
Web User Interface:
Features->Forward&DND->Forward->No Answer Forward->Off Code
Phone User Interface:
Menu->Features->Call Forward->No Answer Forward->Off Code
features.fwd_diversion_enable
0 or 1
1
Description:
Enables or disables the IP phone to present the diversion information when an incoming call
is forwarded to your IP phone.
0-Disabled
1-Enabled
Web User Interface:
Features->General Information->Diversion/History-Info
Phone User Interface:
None
forward.international.enable
0 or 1
1
Description:
Enables or disables the IP phone to forward incoming calls to international numbers (the
prefix is 00).
0-Disabled
1-Enabled
Note: It works only if the value of the parameter “features.fwd.allow” is set to 1 (Enabled).
Web User Interface:
Features->General Information->Fwd International

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English