Yealink SIP-T2 Series User Manual

Configuring Basic Features
437
2. Select the desired value from the pull-down list of Fwd International.
3. Click Confirm to accept the change.
To configure call forward in phone mode via phone user interface:
1. Press Menu->Features->Call Forward.
2. Press or to select the desired forwarding type, and then press the Enter soft key.
3. Depending on your selection:
a) If you select Always Forward:
1) Press or , or the Switch soft key to select the desired value from the
Always Forward field.
2) Enter the destination number you want to forward all incoming calls to in the
Forward to field.
3) (Optional.) Enter the always forward on code and off code respectively in the On
Code and Off Code field.
b) If you select Busy Forward:
1) Press or , or the Switch soft key to select the desired value from the
Busy Forward field.
2) Enter the destination number you want to forward all incoming calls to when the
IP phone is busy in the Forward to field.
3) (Optional.) Enter the busy forward on code and off code respectively in the On
Code and Off Code field.
c) If you select No Answer Forward:
1) Press or , or the Switch soft key to select the desired value from the No
Answer Forward field.
2) Enter the destination number you want to forward all unanswered incoming calls
to in the Forward to field.
3) (Optional.) Enter the no answer forward on code and off code respectively in the

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English