Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
454
Parameters
Permitted Values
Default
Phone User Interface:
None
features.pickup.direct_pickup_enable
0 or 1
0
Description:
Enables or disables the IP phone to display the DPickup soft key when the IP phone is on
the dialing screen.
0-Disabled
1-Enabled
Web User Interface:
Features->Call Pickup->Directed Call Pickup
Phone User Interface:
None
features.pickup.direct_pickup_code
String within 32 characters
Blank
Description:
Configures the directed call pickup code on a phone basis.
Example:
features.pickup.direct_pickup_code = *97
Note: The directed call pickup code configured on a per-line basis
(“account.X.direct_pickup_code”) takes precedence over that configured on a phone basis
(“features.pickup.direct_pickup_code”).
Web User Interface:
Features->Call Pickup->Directed Call Pickup Code
Phone User Interface:-
None
Directed Call Pickup Key
For more information on how to configure the DSS Key, refer to Appendix D: Configuring DSS
Key on page 948.