Yealink SIP-T2 Series

Configuring Basic Features
453
expansion_module.X.key.Y.label
Web User Interface
Assign a directed call pickup key.
Navigate to:
http://<phoneIPAddress>/servlet?p=
dsskey&q=load&model=0
Configure directed call pickup code
on a per-line basis.
Navigate to:
http://<phoneIPAddress>/servlet?p=a
ccount-adv&q=load&acc=0
Configure directed call pickup feature
on a phone basis.
Navigate to:
http://<phoneIPAddress>/servlet?p=f
eatures-callpickup&q=load
Phone User Interface
Assign a directed call pickup key.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
account.X.direct_pickup_code
String within 32 characters
Blank
Description:
Configures the directed call pickup code for account X.
X ranges from 1 to 16 (for SIP-T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2)
Example:
account.1.direct_pickup_code = *97
Note: The directed call pickup code configured on a per-line basis
(“account.X.direct_pickup_code”) takes precedence over that configured on a phone basis
(“features.pickup.direct_pickup_code”).
Web User Interface:
Account->Advanced->Directed Call Pickup Code