Yealink SIP-T2 Series User Manual

Configuring Advanced Features
607
Parameters
Permitted Values
Default
X is equal to 1 (for SIP-T19(P) E2)
Web User Interface:
None
Phone User Interface:
None
account.X.acd.available
0 or 1
0
Description:
Enables or disables the IP phone to display the Available/Avail or Unavailable/Unavail
soft key for account X after the IP phone logs into the ACD system.
0-Disabled
1-Enabled
X ranges from 1 to 16 (for SIP-T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2)
Note: It works only if the value of the parameter “account.X.acd.enable” is set to 1
(Enabled).
Web User Interface:
None
Phone User Interface:
None
account.X.subscribe_acd_expires
Integer from 120 to
3600
3600
Description:
Configures the period (in seconds) of ACD subscription for account X.
X ranges from 1 to 16 (for SIP-T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2)

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English