Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
608
Parameters
Permitted Values
Default
Note: It works only if the value of the parameter “account.X.acd.enable” is set to 1
(Enabled).
Web User Interface:
Account->Advanced->ACD Subscribe Period(120~3600s)
Phone User Interface:
None
acd.auto_available
0 or 1
0
Description:
Enables or disables the IP phone to automatically change the status of the ACD agent to
available after the designated time.
0-Disabled
1-Enabled
Note: It works only if the value of the parameter “account.X.acd.enable” is set to 1
(Enabled).
Web User Interface:
Features->ACD->ACD Auto Available
Phone User Interface:
None
acd.auto_available_timer
Integer from 0 to 120
60
Description:
Configures the interval (in seconds) for the status of the ACD agent to be automatically
changed to available.
Note: It works only if the values of parameters “account.X.acd.enable” and
“acd.auto_available” are set to 1 (Enabled).
Web User Interface:
Features->ACD->ACD Auto Available Timer (0~120s)
Phone User Interface:
None