Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
620
2. Click on Advanced, select Shared Call Appearance from the pull-down list of Shared
Line.
3. Click Confirm to accept the change.
To configure the call pull feature access code via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Enter the call pull feature access code (e.g., *11) in the Call Pull Feature Access Code field.
4. Click Confirm to accept the change.
To Next Page
Loading...
