Configuring Advanced Features
621
To configure the private hold soft key via web user interface:
1. Click on Settings->Softkey Layout.
2. Select Enabled from the pull-down list of Custom Softkey.
3. Select On Talk from the pull-down list of Call States.
4. Select PriHold from the Unselected Softkeys column and then click .
The PriHold appears in the Selected Softkeys column.
5. Click Confirm to accept the change.
To configure a private hold key via web user interface:
1. Click on Dsskey->Line Key.
2. In the desired DSS key field, select Private Hold from the pull-down list of Type.
3. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
4. Click Confirm to accept the change.
To configure a private hold key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Press or , or the Switch soft key to select Key Event from the Type field.
3. Press or , or the Switch soft key to select Private Hold from the Key Type field.
4. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
5. Press the Save soft key to accept the change.
To Next Page
Loading...
Need help?
General
