Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
628
Parameters
Permitted Values
Default
account.X.subscribe_mwi_to_vm
0 or 1
0
Description:
Enables or disables the IP phone to subscribe the message waiting indicator to the voice
mail number for account X.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the IP phone will subscribe the message waiting indicator to the
account X.
X ranges from 1 to 16 (for SIP-T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2)
Note: It works only if the value of the parameter “account.X.subscribe_mwi” is set to 1
(Enabled) and “voice_mail.number.X” is configured.
Web User Interface:
Account->Advanced->Subscribe MWI To Voice Mail
Phone User Interface:
None
voice_mail.number.X
String within 99
characters
Blank
Description:
Configures the voice mail number for account X.
X ranges from 1 to 16 (for SIP-T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2)
Example:
voice_mail.number.1 = 1234
Web User Interface:

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English