Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
758
Parameters
Permitted Values
Default
Enables or disables the custom soft key X to be displayed in the idle state.
0-Disabled
1-Enabled
Note: It works only if the values of the parameters “features.enhanced_dss_keys.enable”
and “softkey.X.enable” are set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
softkey.X.use.incoming_call
(X ranges from 1 to 10)
0 or 1
0
Description:
Enables or disables the custom soft key X to be displayed in the alerting (ringing) state.
0-Disabled
1-Enabled
Note: It works only if the values of the parameters “features.enhanced_dss_keys.enable”
and “softkey.X.enable” are set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
softkey.X.use.connecting
(X ranges from 1 to 10)
0 or 1
0
Description:
Enables or disables the custom soft key X to be displayed in the connecting state.
0-Disabled
1-Enabled
Note: It works only if the values of the parameters “features.enhanced_dss_keys.enable”
and “softkey.X.enable” are set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None