Yealink SIP-T2 Series User Manual

Configuring Advanced Features
757
Parameters
Permitted Values
Default
softkey.X.action
(X ranges from 1 to 10)
String
Blank
Description:
Configures the action or function for custom soft key X.
This value uses the same macro action string syntax as an Enhanced DSS key.
You can also invoke the EDK macro that was already defined. The macro name follows the
character “!”.
Example:
softkey.1.action = !macro1
In this example, macro1 stands for the macro name configured by the parameter
“edk.edklist.X.mname”.
Note: It works only if the values of the parameters “features.enhanced_dss_keys.enable”
and “softkey.X.enable” are set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
softkey.X.softkey_id
(X ranges from 1 to 10)
String
Blank
Description:
Configures the softkey id for custom softkey X.
Example:
softkey.1.softkey_id = custom_macro1
Note: It works only if the values of the parameters “features.enhanced_dss_keys.enable”
and “softkey.X.enable” are set to 1 (Enabled). To distinguish the custom softkey id and
system-defined softkey id, the custom softkey id displayed on the LCD screen will add a
“#” prefix (e.g., #custom_macro1).
Web User Interface:
None
Phone User Interface:
None
softkey.X.use.idle
(X ranges from 1 to 10)
0 or 1
0
Description:

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English