Yealink SIP-T2 Series - Page 850

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
826
voice.jib.max
voice.jib.normal
Configure the mode of jitter buffer and
the delay time for jitter buffer in the
wireless network.
Parameters:
voice.wifi_jib.adaptive
voice.wifi_jib.min
voice.wifi_jib.max
voice.wifi_jib.normal
Web User Interface
Configure the mode of jitter buffer and
the delay time for jitter buffer in the wired
network.
Navigate to:
http://<phoneIPAddress>/servlet?p=setti
ngs-voice&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
voice.jib.adaptive
0 or 1
1
Description:
Configures the type of jitter buffer in the wired network.
0-Fixed
1-Adaptive
Web User Interface:
Settings->Voice->JITTER BUFFER->Type
Phone User Interface:
None
voice.jib.min
Integer from 0 to 400
60
Description:
Configures the minimum delay time (in milliseconds) of jitter buffer in the wired network.
Note: It works only if the value of the parameter “voice.jib.adaptive” is set to 1 (Adaptive).
Web User Interface:
Settings->Voice->JITTER BUFFER->Min Delay