Yealink SIP-T2 Series

Configuring Audio Features
827
Parameters
Permitted Values
Default
Phone User Interface:
None
voice.jib.max
Integer from 0 to 400
240
Description:
Configures the maximum delay time (in milliseconds) of jitter buffer in the wired network.
Note: It works only if the value of the parameter “voice.jib.adaptive” is set to 1 (Adaptive).
Web User Interface:
Settings->Voice->JITTER BUFFER->Max Delay
Phone User Interface:
None
voice.jib.normal
Integer from 0 to 400
120
Description:
Configures the normal delay time (in milliseconds) of jitter buffer in the wired network.
Note: It works only if the value of the parameter “voice.jib.adaptive” is set to 0 (Fixed).
Web User Interface:
Settings->Voice->JITTER BUFFER->Normal
Phone User Interface:
None
voice.jib.wifi.adaptive
0 or 1
1
Description:
Configures the type of jitter buffer in the wireless network.
0-Fixed
1-Adaptive
Note: It is only applicable to SIP-T48G/T48S/T46G/T46S/T29G IP phones.
Web User Interface:
None
Phone User Interface:
None
voice.jib.wifi.min
Integer from 0 to 500
60
Description: