Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
62
Parameters
Permitted Values
Default
only applicable to SIP-T48G/T48S/T46G/T46S/T29G IP phones.
Web User Interface:
Network->WiFi->Change Priority
Phone User Interface:
None
static.wifi.X.security_mode
(X ranges from 1 to 5)
NONE, WEP, WPA-PSK
or WPA2-PSK
NONE
Description:
Configures the security mode of the wireless network X.
Note: It works only if the value of the parameter “static.wifi.enable” is set to 1 (Enabled). It is
only applicable to SIP-T48G/T48S/T46G/T46S/T29G IP phones.
Web User Interface:
Network->WiFi->Security Mode
Phone User Interface:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Add->Security Mode
static.wifi.X.cipher_type
(X ranges from 1 to 5)
NONE, WEP, TKIP, CCMP
or TKIP CCMP
NONE
Description:
Configures the encryption type of the wireless network X.
NONE-NONE
WEP-WEP
TKIP-TKIP
CCMP-AES
TKIP CCMP-TKIP AES
Note: It works only if the value of the parameter “static.wifi.enable” is set to 1 (Enabled) and
“static.wifi.X.security_mode” is set to WPA-PSK or WPA2-PSK. It is only applicable to
SIP-T48G/T48S/T46G/T46S/T29G IP phones.
Web User Interface:
Network->WiFi->Cipher Type
Phone User Interface:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Add->Cipher Type
static.wifi.X.password
(X ranges from 1 to 5)
String within 64
characters
Blank