Yealink SIP-T2 Series - Page 907

Configuring Security Features
883
Parameters
Permitted Values
Default
Description:
Enables or disables the IP phone to reserve custom certificates after it is reset to factory
defaults.
0-Disabled
1-Enabled
Web User Interface:
None
Phone User Interface:
None
To configure TLS on a per-line basis via web user interface:
1. Click on Account->Register.
2. Select the desired account from the pull-down list of Account.
3. Select TLS from the pull-down list of Transport.
4. Click Confirm to accept the change.
To configure the trusted certificates via web user interface:
1. Click on Security->Trusted Certificates.