Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
904
Parameters
Permitte
d Values
Defa
ult
Description:
Configures the period (in seconds) of the local log files (<MAC>-boot.log and
<MAC>-sys.log) uploads to the provisioning server or a specific server.
Example:
static.auto_provision.local_log.backup.upload_period = 60
Note: It works only if the value of the parameter
“static.auto_provision.local_log.backup.enable” is set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
static.auto_provision.local_log.backup.path
URL
within
1024
characte
rs
Blank
Description:
Configures the upload path of the local log files (<MAC>-boot.log and <MAC>-sys.log).
If you leave it blank, the IP phone will upload the local log files to the provisioning server.
If you configure a relative URL (e.g., /upload), the IP phone will upload the local log files by
extracting the root directory from the access URL of the provisioning server.
If you configure an absolute URL with protocol (e.g., tftp), the IP phone will upload the local
log files using the desired protocol. If no protocol, the IP phone will use the same protocol
with auto provisioning for uploading files.
Example:
static.auto_provision.local_log.backup.path = tftp://10.3.6.133/upload/
Note: It works only if the value of the parameter
“static.auto_provision.local_log.backup.enable” is set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
static.auto_provision.local_log.backup.append
0 or 1
0
Description:

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English